FP6 Veterinary Infusion Pump
Precise, flexible and easy-to-operate volumetric infusion pump designed for veterinary hospitals and clinics.
*Under specified operating conditions.
What Is a Veterinary Infusion Pump?
A veterinary infusion pump is a medical device used to deliver IV fluids and medications to animal patients at a controlled flow rate and programmed volume.
DERRY FP6 is a volumetric veterinary infusion pump designed for controlled IV infusion in veterinary clinics and animal hospitals.
Learn more in our Veterinary Infusion Pump Buying GuideHow a Veterinary Infusion Pump Works
Control
Monitor
Common Challenges in Veterinary Infusion Therapy
Precise Flow Control
Small veterinary patients and long infusion procedures require controlled and consistent flow settings.
Occlusion Detection & Alarm
Tubing bends, catheter resistance or line blockage require timely monitoring.
Air-in-Line Detection
Veterinary teams need clear detection and alarm settings during infusion.
Flexible Infusion Programming
Different treatment protocols may require different infusion rates, volumes or timed stages.
Continuous & Reliable Operation
Hospitalized patients may require equipment that continues operating through extended treatments and power changes.
Designed to address everyday veterinary infusion challenges with precise delivery, configurable alarms and flexible infusion settings.
See How FP6 Addresses These ChallengesWhy Choose the FP6 Veterinary Infusion Pump?
Wide Flow Rate Range
Adjustable flow rates from 0.1 to 1200 mL/h support a wide range of veterinary infusion requirements, from low-rate fluid administration to higher-volume infusion.
Adjustable Occlusion Pressure
5 selectable occlusion pressure levels — 20, 50, 80, 110 and 130 kPa — allow settings to be adjusted for different infusion requirements and patient conditions.
Adjustable Air Bubble Detection
Selectable air bubble detection thresholds of 10, 50, 100, 200 and 300 μL, with cumulative bubble monitoring, support safer IV infusion management.
Touchscreen + Physical Keys
A 3.5-inch color TFT touchscreen combined with physical control keys provides clear parameter visibility and flexible operation during daily veterinary use.
Extended Battery Runtime
The built-in 11.1 V, ≥2600 mAh lithium battery provides more than 9 hours of operation at 25 mL/h, supporting extended treatments and temporary power interruptions.
Compact & Portable Design
With a weight of approximately 1.4 kg and compact dimensions of 132 × 101 × 164 mm, the FP6 is easy to position in treatment areas, wards and veterinary cages.
In short: The FP6 combines a wide flow range, adjustable safety monitoring, flexible operation and extended battery runtime in a compact veterinary infusion pump designed for everyday clinical use.
Veterinary Infusion Pump Modes for Different Clinical Workflows
The FP6 veterinary infusion pump supports five infusion modes for different veterinary treatment protocols, including routine fluid therapy, drop-based infusion, volume/time programming, weight-based dosing, and multi-stage infusion.
01 Simple Mode
Set the flow rate and VTBI (Volume to Be Infused) directly for routine veterinary fluid therapy.
02 Drops/min Mode
Set infusion by drops per minute for veterinary workflows that use traditional drip-rate calculations.
03Volume / Time (Vol/T) Mode
Enter any two parameters—volume, infusion time, or flow rate—and FP6 automatically calculates the third.
04Weight-Based (Vol/W) Mode
Configure infusion based on patient weight, drug concentration, dose rate, and VTBI for weight-based veterinary treatment protocols.
05Sequential Infusion Mode
Preset multiple continuous infusion stages with different parameters. FP6 supports up to 20 programmable sequences for multi-stage infusion protocols.
Which infusion mode should I use?
Simple Mode is designed for routine rate-and-volume settings, while Vol/T and Vol/W provide additional programming options for time-based or weight-based protocols. Sequential Mode is intended for treatments requiring multiple preset infusion stages.
Veterinary Infusion Safety Monitoring & Alarm System
FP6 combines real-time infusion pressure monitoring with multiple alarms and system safeguards to help veterinary teams identify abnormal infusion conditions during treatment.
Dynamic Pressure Monitoring (DPS)
FP6 displays the infusion line pressure in real-time relative to the set occlusion threshold.
Smart Alarm System
- Occlusion / Infusion Blocked
- Air-in-Line
- Near Infusion End
- Door Open
- Low Battery
- Empty Bottle
System Self-Test
Automatic System Self-Test:
Adjustable Screen Auto-Lock
An adjustable auto-lock timer helps prevent unintended setting changes caused by accidental screen touches.
Night Mode for Hospitalization
Reduced screen brightness supports overnight infusion monitoring in veterinary hospitalization and critical-care areas.
Additional Infusion Control Functions
FP6 provides Bolus, KVO and Anti-Bolus functions to support fluid delivery and infusion line management across different veterinary workflows.
Bolus Infusion
Provides rapid fluid delivery at a preset bolus rate and volume when required by the clinical protocol.
- Bolus Rate: 0.1–1200 ml/h
- Bolus VTBI: 0.1–100 ml
KVO (Keep Vein Open)
After the programmed infusion is completed, KVO mode maintains a low flow rate to help keep the IV line open.
- Manual KVO Rate: 0.1–30 ml/h
Anti-Bolus
After an occlusion alarm, the Anti-Bolus function releases accumulated line pressure to help reduce unintended fluid delivery when the occlusion is cleared.
Veterinary Infusion Pump Applications
FP6 supports fluid administration across veterinary hospitals, pet clinics, surgical workflows, and inpatient care environments.
Veterinary Hospitals
Routine and inpatient fluid administration across veterinary treatment workflows.
Pet Clinics
Daily IV fluid administration for dogs, cats, and other small animal patients.
Surgery & Perioperative Care
Controlled fluid administration during surgical and perioperative workflows.
Hospitalization & Critical Care
Extended infusion support for hospitalized veterinary patients requiring ongoing monitoring.
Veterinary Infusion Set Compatibility & Calibration
FP6 supports compatible infusion sets with common drip factors of 15, 19, 20 and 60 drops/mL. When switching between different infusion set brands, models or batches, calibration should be performed according to the product instructions to maintain infusion accuracy.
Calibration Is Important
Recalibration helps maintain the specified infusion accuracy when different compatible infusion sets are used.
Supported Drip Factors
Veterinary Infusion Pump vs Syringe Pump
Veterinary infusion pumps are generally used for continuous IV fluid delivery from a bag or bottle, while syringe pumps are typically used for smaller-volume, syringe-based delivery.
| Factor |
Veterinary Infusion Pump
|
Veterinary Syringe Pump
|
|---|---|---|
| Fluid Source | IV bag or bottle through infusion tubing | Syringe |
| Delivery Method | Controlled delivery through an infusion set | Controlled movement of the syringe plunger |
| Typical Application | Continuous IV fluid administration | Small-volume fluid or medication delivery |
| Volume Profile | Typically suited to larger or longer-duration fluid delivery | Typically suited to smaller, precisely controlled volumes |
| Consumable Compatibility | Infusion set compatibility & calibration | Syringe size / brand compatibility |
FP6 is a volumetric veterinary infusion pump designed for controlled IV fluid delivery from an infusion bag or bottle.
Need a syringe-based solution? Explore Veterinary Syringe PumpsAlready decided that an infusion pump fits your workflow? Here are the key factors to compare before purchasing.
How to Choose a Veterinary Infusion Pump for Your Clinic or Market
1. Clinical Workflow & Flow Rate
Choose a pump with a flow range that matches your routine fluid therapy, hospitalization, surgical, and other veterinary infusion workflows.
FP6: 0.1–1200 ml/h
2. Infusion Set Compatibility
Confirm that locally available infusion sets are compatible and check whether calibration is supported when changing brands, models, or batches.
FP6: Supports 15 / 19 / 20 / 60 drops/ml with calibration.
3. Safety Monitoring & Alarms
Look for essential monitoring functions such as occlusion detection, air-in-line detection, infusion-end alerts, and pressure monitoring.
4. Interface & Daily Usability
Consider screen visibility, physical controls, programming modes, screen lock, and night-use features for everyday clinical operation.
5. Battery, Installation & Support
Evaluate battery runtime, mounting flexibility, calibration requirements, technical documentation, and after-sales support.
View Full Veterinary Infusion Pump Buying Guide →
Veterinary Infusion Pump Buying Checklist
- Does the flow range match your applications?
- Are local infusion sets compatible?
- Are key alarms and pressure monitoring included?
- Is the interface easy for daily clinical use?
- Are battery, documentation and support suitable for your market?
FP6 Veterinary Infusion Pump Specifications
A. Infusion Performance
- Flow Rate: 0.1–1200 ml/h
- Rate Increment: 0.01 ml/h
- Accuracy: ≤±5% after calibration
- Applicable Infusion Sets: 15 / 19 / 20 / 60 drops/ml
- VTBI: 0.1–9999.99 ml
- Cumulative Infusion Volume: 0–9999.99 ml
- BOLUS Rate: 0.1–1200 ml/h
- BOLUS VTBI: 0.1–100 ml
- Manual KVO Rate: 0.1–30 ml/h
- Manual KVO VTBI: 0.1–1 ml
B. Detection & Safety
- Occlusion Pressure: 20 / 50 / 80 / 110 / 130 kPa
- Pressure Units: MPa / kPa / mmHg / inH₂O / psi / mbar
- Single Bubble Detection: 10 / 50 / 100 / 200 / 300 μl
- Cumulative Bubble Detection: 50–400 μl / 15 min
- Max Output Pressure: ≤150 kPa
- Max Infusion Vol (Single Fault): 1 ml
- Protection Rating: IP44
- Classification: Class I / Type CF / Continuous
C. Power & Display
- Display: 3.5-inch TFT Color Touchscreen
- AC Input: 100–240V AC, 50/60Hz
- Power: 25VA
- Battery: 11.1V Lithium Battery, ≥2600mAh
- Battery Runtime: >9 h (25 ml/h); >6 h (1200 ml/h)
- External DC Input: 10–16V DC
D. Physical Specifications
- Dimensions: 132 × 101 × 164 mm
- Net Weight: Approx. 1.4 kg
- Gross Weight: Approx. 1.7 kg
- Service Life: 7 years
- Operating Temp: +5°C to +40°C
- Storage Temp: −20°C to +55°C
Specifications may vary by configuration or product update. Please confirm the latest technical information before ordering.
Standard Package & Optional Accessories
Standard Package
- FP6 Veterinary Infusion Pump × 1
- Power Cord × 1
- Operator’s Manual × 1
- Pole / Fixture Clamp × 1
Optional
- Drop Sensor × 1
Built for Distributors, Importers & Veterinary Groups
DERRY supports veterinary equipment distributors, importers and veterinary groups with product sourcing, quotation coordination, documentation and multi-category supply support.
Distributor Quotation Support
B2B quotation support based on product requirements, order quantities and market needs.
Branding & Label Coordination
Branding, nameplate or packaging options can be coordinated for applicable product lines.
Product & Technical Documentation
Access product specifications, manuals, catalogs and available technical documentation for sales and local market support.
Multi-Category Sourcing
Source multiple veterinary equipment categories through one coordinated supply partner.
Why Veterinary Equipment Buyers Work With DERRY
Deep understanding of veterinary clinical requirements.
Real-world operational background guides our product selection.
Supporting veterinary workflows globally.
Reducing coordination effort with multiple suppliers.
FP6 Product Resources
Veterinary Infusion Pump FAQs
What is a veterinary infusion pump?
What type of infusion pump is the FP6?
How accurate is the FP6 veterinary infusion pump?
What infusion sets can be used with FP6?
How long does the FP6 battery last?
Can distributors use their own branding?
What is the difference between a veterinary infusion pump and a syringe pump?
Complete Your Veterinary Infusion & Patient Care Setup
Veterinary Syringe Pump
For smaller-volume and highly precise medication delivery.
Explore Veterinary Syringe Pumps →
Veterinary Infusion Warmer
Helps maintain fluid temperature during infusion or blood transfusion.
Explore Veterinary Infusion Warmers →
Veterinary Patient Monitor
Multi-parameter monitoring for surgery and ICU.
Explore Veterinary Patient Monitors →
Veterinary Anesthesia Machine
Inhalation anesthesia workstations for veterinary surgery.
Explore Veterinary Anesthesia Machines →Need a Veterinary Infusion Pump for Your Market?
Contact DERRY for FP6 specifications, distributor pricing, product documentation, and sourcing support for your market.